DC-DC Converter DC (8V-30V)to DC 5V 2.5A

Keywords: car power adapter power cord with low voltage protection delay start

Product Type: YS-12-5V

Color Classification: DC3.5 * 1.35 MICRO Straight

Whether with USB: yes

Overcurrent protection: Default 2.5A overcurrent protection, can be done in a precise limit 0-3A, good power, more than enough output capacity is more important is that the output obtained effective control for limiting protection to ensure low heat power, and high reliability.

Overvoltage protection: 5.6V overvoltage protection, to avoid the risk of high-voltage shock devices, with more peace of mind at ease

1. Model: F3025

2. Input voltage 8-30V, power supply will not burn, and then there will be no less than 8V supply function, designed for car 12V input exceeds 16V, the default is not recognized, the power will not output

3. Output voltage: DC5V, 5.6V overvoltage protection

4. Output Current: 2.5A current settings remain over protection, can be set between 0-3A, have special needs, please contact customer service

5. Protection:

1. Input reverse polarity protection: no less reverse input power

2. Output short circuit protection: If the output is shorted, no extra energy input lower inflows accumulated heat energy situation, there will not form spontaneous combustion (hundred percent there)

3. 5.6-5.8V output overvoltage protection (hundred percent there)

4. Delay start: enter the access power, the automatic delay 12 seconds after the official launch of the power, to avoid the surge of high voltage equipment to restart the phenomenon of self-test because the car and the car starts caused by the formation of the impact of the power of their own

5. Low-off feature to select: Set There are several different starting voltage to choose from, you can select the voltage, battery voltage and so do the monitoring, selectable voltage, for example, connected to a 12V car, you can choose to start 11.5V this power supply battery voltage drops below 11.5V monitored when not automatically cut off power to protect the power supply voltage is too low to avoid should not play in the event of fire, such as selecting 12.8V, it means that the power supply is automatically detected, thereby achieving 12.8V power supply when it starts.

6. monitoring time selectable settings: If you want to continue running after stopping other equipment records, you can choose to use this power to monitor the time, the current time there is an optional 12 hours, 24 hours, 48 hours and infinity.

7. momentary undervoltage delay function:

There are circumstances under point ACC, even if you set the minimum starting voltage, power supply will continue to work for 30 seconds, 30 seconds to reply back if the input voltage, the power still continue to work, if the recovery does not come back before being really close. For example, the recorder running, sometimes suddenly open headlights, will form a rapid pull-down voltage lower than the starting voltage, if they have this function, the recorder will not die, but you can hide 30 seconds, 30 seconds confirm voltage does not recover back before officially closed.